|
|
|
|
Wakeskate (BLUNT END) 0.7"
Designed specifically for wakeskaters, the blunt end allows riders to lock into sliders.
|
|
3/16" to 1/4" Adapter Hardware (4-Pack)
3/16" to 1/4" adapter bolts are narrow on one end to fit through boards with narrow fin holes while being wide on the other end to screw into a standard fin. This adapter is only necessary for a few boards such as newer Liquid Force boards and older Hyperlite board. If you are not sure if you need these adapters, email us at info@cdifins.com |
Detailed view |
|
USD 14.99
Plus shipping and handling
|
|
|
Detailed view |
|
USD 5.95
Plus shipping and handling
|
|
|
|
|
Low Pro 0.7"
Designed for wakeskaters and other riders looking for a finless-feeling ride. |
|
Low Pro 1.0"
The Low Pro fin offers tracking and stability while still being light weight
and low profile
|
Detailed view |
|
USD 14.99
Plus shipping and handling
|
|
|
Detailed view |
|
USD 14.99
Plus shipping and handling
|
|
|
|
|
|
|
|
|
Dynasty 1.3"
Designed for a "Free Riding" style that also takes advantage of terrain riding.
|
|
Dynasty 1.5"
Designed for a "Free Riding" style that also takes advantage of terrain riding. |
Detailed view |
|
USD 14.99
Plus shipping and handling
|
|
|
Detailed view |
|
USD 14.99
Plus shipping and handling
|
|
|
|
|
|
|
|
|
Pharaoh 1.7"
Designed for the Hard Charging, Wake Popping, Spinning Stylized rider. |
|
Pharaoh 1.9"
Designed for the Hard Charging, Wake Popping, Spinning Stylized rider.
|
Detailed view |
|
USD 14.99
Plus shipping and handling
|
|
|
Detailed view |
|
USD 14.99
Plus shipping and handling
|
|
|
|
|
|
|
|
|
Royale 2.1"
If your riding is stylized by extreme carving, line loading and HUGE AIR, the Royale is a mandatory
addition to your arsenal! |
|
Royale 2.4"
If your riding is stylized by extreme carving, line loading and HUGE AIR, the Royale is a mandatory addition to your arsenal!
|
Detailed view |
|
USD 14.99
Plus shipping and handling
|
|
|
Detailed view |
|
USD 14.99
Plus shipping and handling
|
|
|
|
|
|
1/4" Hardware (4-Pack)
The 1/4" bolt is standard on most boards, but check your board before you buy or email us at info@cdifins.com if you have any doubt.
Pack includes: Four 1/4" bolts, Four metal washers, Four plastic washers |
|
3/16" Hardware (4-Pack)
3/16" bolts are narrower than the 1/4" bolts and usually fit on boards that have a two-hole pattern. The 3/16" bolt is not standard on most boards so check your board before you buy or email us at info@cdifins.com
Pack includes: Four 3/16" bolts, Four metal washers, Four plastic washers |
Detailed view |
|
USD 3.95
Plus shipping and handling
|
|
|
Detailed view |
|
USD 3.95
Plus shipping and handling
|
|
|
|
|
|
